WTC MUD #1 RecordsBoard minutes, agendas and votes

2024 Drinking Water Quality Report

Unofficial searchable copy. For the official record, use the district’s own copy.

Page 1

Page 1 of 4
PWS #: 2460120
Williamson Travis Counties MUD No. 1
2024 Drinking Water Quality Report
DEAR CUSTOMER:
This report is intended to provide you with important
information about your drinking water and the efforts made
by the water system to provide safe drinking water.
The sources of drinking water (both tap water and bottled
water) generally include rivers, lakes, streams, ponds,
reservoirs, springs, and wells. As water travels over the
surface of the land or through the ground, it dissolves
naturally-occurring minerals, and in some cases,
radioactive material, and can pick up substances resulting
from the presence of animals or from human activity.
Drinking water, including bottled water, may reasonably be
expected to contain at least small amounts of some
contaminants. The presence of contaminants does not
necessarily indicate that water poses a health risk. More
information about contaminants and potential health effects
can be obtained by calling the EPA’s Safe Drinking Water
Hotline (1-800-426-4791). Contaminants that may be
present in the source water include:
1) Microbial contaminants, such as viruses and bacteria,
which may come from sewage treatment plants, septic
systems, agricultural livestock operations, and wildlife. 2)
Inorganic contaminants, such as salts and metals, which
can be naturally-occurring or result from urban storm water
runoff, industrial or domestic wastewater discharges, oil
and gas production, mining, or farming. 3) Pesticides and
herbicides, which may come from a variety of sources such
as agriculture, urban stormwater runoff, and residential
uses. 4) Organic chemical contaminants, including
synthetic and volatile organic chemicals, which are by-
products of industrial processes and petroleum production,
and can also, come from gas stations, urban storm water
runoff, and septic systems. 5) Radioactive contaminants,
which can be naturally- occurring or be the result of oil and
gas production and mining production and mining activities.
In order to ensure that tap water is safe to drink, EPA
prescribes regulations which limit the amount of certain
contaminants in water provided by public water systems.
FDA regulations establish limits for contaminants in bottled
water which must provide the same protection for public
health.
Contaminants may be found in drinking water that may
cause taste, color, or odor problems. These types of
problems are not necessarily causes for health concerns.
For more information on taste, odor, or color of drinking
water, please contact the district’s operator, Inframark.
You may be more vulnerable than the general population
to certain microbial contaminants such as Cryptosporidium,
in drinking water. Infants, some elderly, or
immunocompromised persons such as those undergoing
chemotherapy for cancer; those who have undergone
organ transplants; those who are undergoing treatment
with steroids; and people with HIV / AIDS or other immune
system disorders can be particularly at risk from infections.
You should seek advice about drinking water from you
physician or health care provider. Additional guidelines on
appropriate means to lessen the risk of infection by
Cryptosporidium are available from the Safe Drinking
Water Hotline at (800-426-4791).
If present, elevated levels of lead can cause serious health
problems, especially for pregnant women and young
children. Lead in drinking water is primarily from materials
and components associated with service lines and home
plumbing. We are responsible for providing high quality
drinking water, but we cannot control the variety of
materials used in plumbing components. When your water
has been sitting for several hours, you can minimize the
potential for lead exposure by flushing your tap for 30
seconds to 2 minutes before using water for drinking or
cooking. If you are concerned about lead in your water, you
may wish to have your water tested. Information on lead in
drinking water, testing methods, and steps you can take to
minimize exposure is available from the Safe Drinking
Water Hotline or at http://www.epa.gov/safewater/lead.
The source of drinking water used by Williamson Travis
Counties MUD 1 is purchased water from the City of Cedar
Park who is providing surface water from Brushy Creek
Regional Utility Authority that comes from Lake Travis.
TCEQ completed a Source Water Susceptibility for all
drinking water systems that own their sources. This report
describes the susceptibility and types of constituents that
may come into contact with the drinking water source
based on human activities and natural conditions. The
system(s) from which we purchase our water received the
assessment report. For more information on source water
assessments and protection efforts at our system contact,
Darald Berger Inframark, at (469-536-6304).
For more information about your sources of water, please
refer to the Source Water Assessment Viewer available at
the following: http://www.tceq.texas.gov/gis/swaview
Further details about sources and source water
assessments are available in Drinking Water Watch at the
following URL:http://dww2.tceq.texas.gov/DWW/
Many constituents (such as calcium, sodium, or iron) which
are often found in drinking water can cause taste, color,
and odor problems. The taste and odor constituents are
called secondary constituents and are regulated by the
State of Texas, not the EPA. These constituents are not
causes for health concern. Therefore, secondaries are not
required to be reported in this document but they may
greatly affect the appearance and taste of your water. The
pages that follow list all of the federally regulated or
monitored contaminants which have been found in your
drinking water. The U.S. EPA requires water systems to
test for up to 97 contaminants.
When drinking water meets federal standards there may
not be any health based benefits to purchasing bottled
water or point of use devices.
Public input concerning the water system may be made at
regularly scheduled meetings, generally held at 5:30 PM on
the 3rd Wednesday of the month at  ,
Cedar Park, TX 78613. You may also contact Darald
Berger, Inframark, at 469-536-6304 with any concerns or
questions you may have regarding this report.
Este reporte incluye información importante sobre el agua
para tomar. Para asistencia en español, favor de llamar al
tel. (281) 579-4500.
We have completed an inventory of the water service lines
in Williamson Travis Counties MUD 1 and determined that
some water service line material is Unknown. To request a
copy of the Service Line Inventory for Williamson Travis
Counties MUD 1 or if you believe your service line has
been incorrectly categorized, please contact Inframark
Compliance Team at LCRR@inframark.com or by phone at
1-800-874-6333.
Unregulated Contaminant Monitoring Rule (UCMR)
Williamson Travis Counties MUD 1 has sampled for a series
of unregulated contaminants. Unregulated contaminants are
those that don’t yet have a drinking water standard set by
the EPA. The purpose of monitoring for these contaminants
is to help EPA decide whether the contaminants should have
a standard. As our customers, you have a right to know that
these data are available. The EPA sampled for 30
unregulated chemical contaminants and those contaminants
detected in the District’s source water are in the data table
of the Unregulated Contaminants section of this report.
Definitions & Abbreviations:
Action Level (AL): The concentration of a contaminant which, if
exceeded, triggers treatment or other requirements which a
water system must follow.
AVG: Regulatory compliance with some MCLs are based on
running annual average of monthly samples.
Level 1 assessment: Study of the water system to identify
potential problems and determine (if possible) why total
coliform bacteria have been found in our water system.
Level 2 assessment: Very detailed study of the water system
to identify potential problems and determine (if possible) why
an E. coli MCL violation has occurred and/or why total coliform
bacteria have been found in our water system on multiple
occasions.
Maximum Contaminant Level (MCL): The highest level of a
contaminant that is allowed in drinking water. MCLs are set as
close to MCLGs as feasible using the best available treatment
technology.
Maximum Contaminant Level Goal (MCLG): The level of a
contaminant in drinking water below which there is no known
or expected risk to health. MCLGs allow for a margin of safety.
Maximum Residual Disinfectant Level (MRDL): The highest
level of disinfectant allowed in drinking water. There is
convincing evidence that addition of a disinfectant is necessary
for control of microbial contaminants.
Maximum Residual Disinfectant Level Goal (MRDLG): The
level of drinking water disinfectant below which there is no
known or expected risk to health. MRDLGs do not reflect the
benefits of the use of disinfectants to control microbial
contaminants.
MFL: Million Fibers per Liter (a measure of asbestos).
Mrem: millirems per year (a measure of radiation absorbed by
the body).
N/A: Not applicable.
NTU: Nephelometric Turbidity Units (a measure of turbidity).
pCi/L: Picocuries per liter (a measure of radioactivity).
ppb: micrograms per liter or parts per billion.
ppm: milligrams per liter or parts per million.
ppq: Parts per quadrillion, or picograms per liter (pg/L).
ppt: Parts per trillion, or nanograms per liter (ng/L).
Treatment Technique or TT: A required process intended to
reduce the level of a contaminant in drinking water.

Page 2

Page 2 of 4
PWS #: 2460120
Substance
Unit of
Measure
Year
MCL
Average Level
Detected
Min - Max
Level
Detected
MCLG
In
Compliance
Typical Sources
Williamson Travis Counties MUD 1 participated in the Environmental Protection Agency’s (EPA) UCMR 5 sampling. The EPA sampled for 30 unregulated chemical contaminants and those contaminants
detected in the District’s source water are in the table below. More information on UCMR 5 is available at URL: https://www.epa.gov/dwucmr/fifth-unregulated-contaminant-monitoring-rule
Unregulated
Contaminant
Year
Average Level
Detected (µg/L)
Range of Levels
Detected (µg/L)
Health-Based Reference
Concentration (µg/L)
Health Information Summary
Lithium
2024
9.72
9.56 - 9.97
10
This data is part of UCMR 5 results in relation to minimum reporting levels and
available non-regulatory health-based reference concentrations.
Inorganic Contaminants (Regulated at the Water Plant)
Nitrate
ppm
2024
10
0.3
0.3 - 0.3
10
Yes
Runoff from fertilizer use; leaching from septic tanks, sewage;
erosion of natural deposits.
Disinfectant Byproducts
Haloacetic Acids (HAA5)
ppb
2024
60
18.39
14 - 21.4
N/A
Yes
By-product of drinking water disinfection.
Total Trihalomethanes
ppb
2024
80
63.56
44.5 - 84.4
N/A
Yes
By-product of drinking water disinfection.
Substance
Unit of
Measure
Year
MRDL
Average Level
Detected
Min - Max
Level
Detected
MRDLG
In
Compliance
Typical Sources
Maximum Residual Disinfectant Level
Chlorine Residual
ppm
2024
4.0
3.08
2.69 - 3.36
4.0
Yes
Water additive used to control microbes.
Substance
Unit of
Measure
Year
90th % Value
EPA Action
Level
Results above
Action Level
MCLG
In
Compliance
Typical Sources
Lead and Copper (Regulated at Customers Tap)
Copper
ppm
2024
0.424
1.3
1
1.3
Yes
Corrosion of household plumbing systems, erosion of natural
deposits; leaching from wood preservatives.
Lead
ppb
2024
1.98
15
0
0
Yes
Corrosion of household plumbing systems; erosion of natural
deposits.

Page 3

Page 3 of 4
PWS #: 2460120
Our Water Supply System Received Water From
City of Cedar Park
Water Quality Results are Listed Below
Substance
Unit of
Measure
Year
MCL
Average Level
Detected
Min - Max
Level
Detected
MCLG
In
Compliance
Typical Sources
Radioactive Contaminants (Regulated at the Water Plant)
Gross Beta
pCi/L
2023
50
4.6
4.6 - 4.6
0
Yes
Decay of natural and man-made deposits.
Unregulated Contaminants
Bromodichloromethane
ppb
2024
N/A
21.0
21 - 21
N/A
Yes
By-product of drinking water disinfection.
Bromoform
ppb
2024
N/A
6.5
6.5 - 6.5
N/A
Yes
By-product of drinking water disinfection.
Chloroform
ppb
2024
N/A
21.0
21 - 21
N/A
Yes
By-product of drinking water disinfection.
Dibromochloromethane
ppb
2024
N/A
17.0
17 - 17
N/A
Yes
By-product of drinking water disinfection.
Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of
unregulated contaminants in drinking water and whether future regulation is warranted.
Inorganic Contaminants (Regulated at the Water Plant)
Barium
ppm
2024
2
0.07
0.07 - 0.07
2
Yes
Discharge of drilling wastes; discharge from metal refineries;
erosion of natural deposits.
Fluoride
ppm
2024
4
0.22
0.22 - 0.22
4
Yes
Erosion of natural deposits; water additive which promotes
strong teeth; discharge from fertilizer and aluminum factories.
Nitrate
ppm
2024
10
0.13
0.07 - 0.19
10
Yes
Runoff from fertilizer use; leaching from septic tanks, sewage;
erosion of natural deposits.
Turbidity
Turbidity has no health effects. However, turbidity can interfere with disinfection and provide a medium for microbial growth. Turbidity may indicate the presence of disease-causing organisms. These organisms
include bacteria, viruses, and parasites that can cause symptoms such as nausea, cramps, diarrhea and associated headaches.
Level Detected
Limit (Treatment Technique)
Violation
Likely Source of Contamination
Highest single measurement
0.18 NTU
1 NTU
No
Soil runoff.
Lowest monthly % meeting limit
100%
0.3 NTU
No
Soil runoff.

Page 4

PWS #: 2460120
Our Water Supply System Received Water From
Brushy Creek Regional Utility Authority
Water Quality Results are Listed Below
Substance
Unit of
Measure
Year
MCL
Average Level
Detected
Min - Max
Level
Detected
MCLG
In
Compliance
Typical Sources
Unregulated Contaminants
Bromodichloromethane
ppb
2024
N/A
4.9
4.9 - 4.9
N/A
Yes
By-product of drinking water disinfection.
Bromoform
ppb
2024
N/A
8.1
8.1 - 8.1
N/A
Yes
By-product of drinking water disinfection.
Chloroform
ppb
2024
N/A
1.5
1.5 - 1.5
N/A
Yes
By-product of drinking water disinfection.
Dibromochloromethane
ppb
2024
N/A
10.0
10 - 10
N/A
Yes
By-product of drinking water disinfection.
Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of
unregulated contaminants in drinking water and whether future regulation is warranted.
Inorganic Contaminants (Regulated at the Water Plant)
Barium
ppm
2024
2
0.07
0.07 - 0.07
2
Yes
Discharge of drilling wastes; discharge from metal refineries;
erosion of natural deposits.
Cyanide
ppb
2024
200
80.0
80 - 80
200
Yes
Discharge from plastic and fertilizer factories; discharge from
steel/metal factories.
Fluoride
ppm
2024
4
0.81
0.81 - 0.81
4
Yes
Erosion of natural deposits; water additive which promotes
strong teeth; discharge from fertilizer and aluminum factories.
Nitrate
ppm
2024
10
0.13
0.08 - 0.19
10
Yes
Runoff from fertilizer use; leaching from septic tanks, sewage;
erosion of natural deposits.
Turbidity
Turbidity has no health effects. However, turbidity can interfere with disinfection and provide a medium for microbial growth. Turbidity may indicate the presence of disease-causing organisms. These organisms
include bacteria, viruses, and parasites that can cause symptoms such as nausea, cramps, diarrhea and associated headaches.
Level Detected
Limit (Treatment Technique)
Violation
Likely Source of Contamination
Highest single measurement
0.52 NTU
1 NTU
No
Soil runoff.
Lowest monthly % meeting limit
99%
0.3 NTU
No
Soil runoff.
* All levels detected were below the MCLs.
Page 4 of 4